When buying a glass cutting machine, you should pay attention to choose a cutting machine that matches your product.The following uses an automated glass cutting machine as an example. When purchasing, what should you pay attention to:
1. Automatic layout optimization function
Due to the particularity of its work, it is generally rare to arrange people with high education or level to work, so the operation of the cutting machine is required to be simple, easy to understand, safe and stable. The optimization should be suitable for your actual situation, and you cannot pursue 100% optimization The cutting rate cannot be cut, the working efficiency is reduced, and it cannot be fully optimized according to the manufacturer's specifications.Because the domestic original glass is not refined, the cutting machine will drop the knife.In addition, the graphics library for shaped glass cutting is more and flexible, and the graphics file can be imported into In the gallery.
2. Selection
According to the actual cutting layout of your own, choose the most suitable for your own, that is, what glass is mainly cut, which is the basis for considering the layout, do not wear big shoes with small feet, because it involves the normal wear of the equipment and unnecessary capital investment.
3. Save energy consumption
When the cutting requirements can also be fulfilled, choosing energy-saving glass cutting opportunities brings many benefits to itself: First, as society develops energy shortages, prices will continue to rise, and energy consumption can save some daily production costs; Consumption can protect the environment and save energy.
4. Cutting accuracy
Choose according to your actual needs.This can't just look at the introduction of the product manual and the words of the manufacturer.It is mainly in-depth technical research, such as: control of the cutter wheel, running-in of the gear rack, reasonable design, and control system The level is then measured in actual cutting. In this way, it is possible to fully grasp the synchronous control level of the cutting machine part and the control system.
5. Maintenance is simple and convenient
Do not equip the sensors on the input and output and the machine with too many unnecessary switches and indicators as much as possible, because once a device on the machine fails, it will affect the use of the glass cutting machine.
6. Cutting speed
The speed can only be discussed under the premise of meeting the cutting accuracy.Because it is difficult for the eyes to judge whether the maximum speed is reached, the software simulation function equipped with the servo drive of the cutting machine can be used to check whether the motor speed can reach the highest speed.
According to the actual cutting layout of your own, choose the most suitable for your own, that is, what glass is mainly cut, which is the basis for considering the layout, do not wear big shoes with small feet, because it involves the normal wear of the equipment and unnecessary capital investment.
