Soda glass, also known as sodium-lime glass, can be identified by the following methods:
1. Composition analysis
Chemical composition: Soda lime glass is mainly composed of silicon dioxide (SiO₂), sodium oxide (Na₂O) and calcium oxide (CaO). The content of these elements in the glass can be determined by chemical analysis or spectral analysis.
2. Physical properties
Hardness: Soda glass has a low hardness and can be preliminarily judged by a hardness test.
Density: Soda glass has a high density and can be measured by a densitometer.
Thermal stability: Soda glass has a high expansion coefficient and poor thermal stability. It is easy to crack under sudden cooling and heating. Its performance under temperature changes can be observed through thermal shock tests.
3. Appearance characteristics
Color: Soda glass is usually colorless or slightly green, which is due to the iron impurities contained in it.
Transparency: Soda glass has good transparency and light transmittance, and the surface is smooth and free of impurities, but it is not as clear as borosilicate glass.
Heating process: Soda glass may leave some defects during the molding process, such as cold lines, material prints, etc., which can be judged by observing the appearance.
4. Performance test
Mechanical properties: The mechanical properties of soda glass include tensile strength, compressive strength, impact strength, etc., which can be evaluated through corresponding tests.
Chemical stability: Soda glass has weak resistance to acids and alkalis, which can be verified through chemical stability tests.
5. Other methods
Buoyancy test: Due to the high density of soda glass, a preliminary judgment can be made through buoyancy tests.
Through the above methods, soda glass can be roughly identified. If precise identification is required, professional composition analysis and performance testing are recommended. If you are interested in the processing and production of soda glass, please consult the relevant equipment. We are equipped with soda glass tube cutting machines, blowing machines, bottom sealing machines and filling machines, etc.
