If the drop temperature of the oral liquid glass bottle is too low, adjust the temperature of the drop in time. In addition, there is a convex ring at the position where the lid body connects with the oral liquid bottle encapsulation mouth, and there is a layer of sealing film on the inner surface of the lid to seal the perforation. The drinking socket of this structure is not exposed to the outside, not easy to be contaminated, and the intubation tube is easily inserted through the sealing film, shortening the contact time of the core, etc. The temperature of the glass liquid should not be too high.
If the temperature of the warm oral liquid bottle is too high, the bottom of the bottle cannot withstand the impact of the stretch rod, and the bottom of the bottle will be directly broken, and the bottom of the glass bottle will appear thinner than the bottle body. There is a hole in the center of the inner surface of the flip cap. The matching flange makes the flange just close the perforation when the flip cover is pressed into the groove, and there is a bevel on the edge of the groove that is not connected to the flip cover, or it is blown directly!