
The production of glass measuring cylinder is produced by secondary processing of glass tube. First, the parameters of the glass machine are modated according to the specifications of the measuring cylinder in advance, the length of the glass tube is cut first, and then the base and hem of the measuring cylinder are treated by blowing principle. Finally, other labeling machines are used to mark the scale.
The selection of glass tube materials: mainly borosilicate glass, because borosilicate glass has high heat resistance and corrosion, and it must be purchased from regular channels to ensure its purity.
1.Put the glass tube into the feed port, cut according to the length requirements, first carve a notch on the glass tube and then heat and cool, use the principle of thermal expansion and contraction to cut the glass tube.
2.The base of the measuring cylinder and a section of the glass tube are heated to a certain temperature and quickly welded together for cooling to complete the base connection.
3.According to customer demand to blow the other end of the glass tube to form a folding design.
4.A certain volume of water is poured into the polished and flat measuring cylinder to mark the scale. The general capacity of the measuring cylinder includes 5ml, 10ml, 15ml, 50ml, 100ml, etc.
5.The error of the glass measuring cylinder is evaluated by comparing the readings of the standard gauge and the calibrated glass gauge. In the calibration process, standard gauges with higher accuracy are used, such as precision balance, standard volumetric bottle, etc., and the error value of the calibrated glass gauge is calculated by comparing the difference in reading between the two.
6.Clean and pack the finished glass measuring cylinder.
