How To Maintain The Ampoule Filling And Sealing Machine

Jun 13, 2022 Leave a message

How to maintain the ampoule filling and sealing machine

1. The ampoule melting and sealing machine must be rotated with the crank handle before starting each time to check whether there is any abnormality in its rotation. After it is confirmed that it is normal, it can start. But please note: Be sure to pull the crank handle out of the machine before you start. Ensure safe operation.


2. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large tools or excessive force to disassemble the parts, so as to avoid damaging the parts or affecting the performance of the machine.


3. Whenever the machine is adjusted, be sure to tighten the screws, turn the machine, and check whether the action meets the requirements before starting.


4. The gas head should always be judged by the size of the fire head, because the small holes of the gas head are easily blocked by carbon deposits or the small holes are deformed after a certain period of use, which affects the firepower.


5. An exhaust pipe should be installed on the flame head of the ampoule melting and sealing machine, which can remove heat and a small amount of dust in the gas, and at the same time maintain the indoor temperature, humidity and cleanliness, which is good for the product quality and the health of the staff.


6. The machine of the ampoule melting and sealing machine must be kept clean, and it is strictly forbidden to leave oil stains, liquid medicine or broken glass on the machine, so as to avoid damage to the machine, so it is necessary to:


(1) During the production process of the machine, the liquid medicine or glass debris should be removed in time.


⑵Before handover, all parts of the machine should be cleaned once, and each part should be refueled once.


(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in normal use, and can be blown off with compressed air.


We need to pay attention to what the ampoule melting and sealing machine needs to pay attention to during the use process, and try not to make mistakes that should not occur, so that we can save a lot of trouble in the later maintenance process.