Nowadays, glass is more and more favored by consumers, not only frosted glass, hot melt glass, painted glass and other decorative effects of strong art glass, as well as a variety of functional glass, such as sound insulation and noise reduction laminated glass, insulating glass and heat insulation flame retardant fire glass. This article will introduce the skills and methods of window glass film, and how to cut glass tubes, to help you broaden your knowledge.
First, the method and skill of window glass film
Steps of window glass film:
1, clean the glass, the glass is completely washed, so that there is no shavings, dust, sand on the glass.
2. Cut the film according to the size of the glass.
3, after cleaning the glass, spray a layer of water on the glass
4. A layer of water is also sprayed on the film and protective film to separate the protective film and the protective film.
5, scrape the water between the film and the glass, use the film to scrape the water inside slowly, and repair the excess film at the corners.
Window film tips:
1, when cutting film, the film should be slightly larger than the glass by more than 1cm.
2, the film is divided into two layers, one layer is a colorless transparent protective film, and the other layer is a film with color.
3, put the protective film on to scrape the water in the direction of 4 points, so that the film has no bubbles.
Window film precautions:
1, whether the scraping blade is smooth and smooth, whether there is a gap, be sure to carefully check the tool.
2. Check the size and quantity of the film.
3, when measuring the window size, you must start from the same side of the window. When cutting, align the film edge with the center line and cut.
4, when all Windows are coated, spray a small amount of cleaning agent to remove other residues. Wipe with a dry rag to make the window smooth and bright.

