Spraying of glass bottles

The glass bottle spraying production line generally consists of a spray booth, a suspension chain and an oven. There is also the front water treatment of glass bottles. Glass bottles need to pay special attention to the problem of sewage discharge. As for the quality of glass bottle spraying, it is related to water treatment, surface cleaning of workpieces, electrical conductivity of hooks, size of gas volume, amount of powder sprayed, and level of operators. It is recommended to choose the following method for trial: pre-processing section
The pre-treatment section of glass bottle spraying includes pre-stripping, main stripping, surface adjustment, etc. If it is in the north, the temperature of the main stripping part should not be too low, and heat preservation is required. Otherwise, the treatment effect will not be ideal;
After the pretreatment, it will enter the preheating section, which generally takes 8 to 10 minutes. It is best to make the sprayed workpiece have a certain amount of residual heat when the glass bottle reaches the powder spraying room, so as to increase the adhesion of the powder;