Types And Styles Of Ampoules

Sep 30, 2022 Leave a message

Types and styles of ampoules

Injection containers generally refer to ampoules or containers made of hard neutral glass (such as penicillin vials, etc.), and there are also plastic containers.

Ampoules are currently used in neck ampoules and powder ampoules, and their volume is usually 1, 2, 5, 10, 20ml and other specifications, and there are also curved neck ampoules. The new national standard GB2637-1995 stipulates that the ampoules used in water injections are all ampoules with curved necks and easy to break. In order to prevent glass chips and particles from entering the ampoule to contaminate the liquid medicine when the bottle neck of the ampoule is broken, the State Drug Administration (SDA) has forced the implementation of the ampoule with a curved neck and easy to break.

There are two types of foldable ampoules, the color ring foldable ampoules and the dot score foldable ampoules. Color ring easy-folding ampoule is a kind of low melting point powder whose expansion coefficient is twice higher than that of ampoule glass, which is melted and solidified on the neck of the ampoule to form a ring. Stress, it can be broken flat with a single fold, and it is not easy to produce glass debris. The point-notch easy-folding ampoule has a slight notch on the curved neck, and a color dot with a diameter of 2mm is marked in the center of the notch. When breaking, apply force to the back in the middle of the notch. At present, ampoules are mostly colorless, which is helpful for checking the clarity of the liquid. For drugs that require shading, amber glass ampoules can be used. Amber color filters out UV light and is suitable for photosensitive drugs. Amber ampoules contain iron oxide. Traces of iron oxide may be leached into the product. If the product contains ingredients that can be catalyzed by iron ions, amber glass containers should not be used.

Powder ampoules are used for dispensing powder or crystalline drugs for injection. Therefore, the neck of the bottle is thick or trumpet-shaped, which is convenient for drug loading. The bottle body of the bottle is as thick as the neck, and a groove is blown at the connection between the neck and the body. This kind of ampoule is inconvenient to use. In recent years, an injection container that can hold powder and solvent at the same time has been developed. The container is divided into two compartments. When using, the top stopper is pressed down, the diaphragm is opened, the solvent flows into the lower compartment, and the drug is dissolved before use. This injection container is especially suitable for some drugs that are unstable in solution.