What Is The Principle Of Ampoule Filling Machine?

Jun 16, 2025 Leave a message

    Ampoule filling machines are mainly used in the pharmaceutical, chemical and beauty industries. They are intelligent devices that quantitatively fill and seal the required solutions. When the machine is working, it is necessary to accurately control a series of important matters such as the filling volume, injection position, diameter and length of the ampoule bottle, sealing tightness and heating temperature. Therefore, the various components of the machine equipment must work together to complete the processing. This is a very complicated project. Today we will talk about the working principle of the ampoule sealing machine and further familiarize ourselves with the glass machinery industry.
    The working principle of the machine: first, the liquid is transported to the filling system through the power system, and the ampoule bottle is transported from the feed port to the workbench, and the control system controls the filling amount. After filling, the flame heats the mouth of the glass bottle to soften the glass, and the wire drawing pliers stretch the mouth to form the injection needle through the catheter to fill the bottle with liquid, and then continue to heat and seal it. Finally, the ampoule bottle is transported to the reduction box for cooling and then transported to the finished product outlet to complete the task. The filling capacity of the machine is generally 5ml, 10ml, 20ml, 50ml, 100ml, 200ml, 250ml, etc. The canning needles are 4-needle, 6-needle, 8-needle and 10-needle. Different numbers of needles correspond to different outputs (range 30-1000pcs/h). The machine is mainly composed of Ampoule bottle feed port, catheters, filling mechanism, brushed fire head rack, scrap collection box, wire drawing pliers rack, export of finished products, reduction box, pressure gauge, oxygen interface and scrap collection box. They are respectively responsible for the power system, filling system, control system, wire drawing and bottom sealing system of the machine.
    When using an ampoule, please pay attention to the following:
    1. The machine is an automated device. Each machine has its own specifications for the ampoule, and it is not applicable to all specifications
    2. The machine and the injection needle should always be kept clean and disinfected regularly to avoid secondary contamination of the liquid and damage to the medical properties of the liquid
    3. During the trial period, read the manual carefully and strictly follow the operating procedures
    4. Before processing the product, observe whether the machine action is abnormal and then place the product. If there is any abnormality in the middle, turn off the power and gas in time.
    5. The equipment should be placed in a dry and ventilated environment to avoid contact with harmful objects.