News

The thickness of the control film is generally 2 kinds, crystal vibrator The control uses the vibration frequency control, and the optical electrod...

The unit weight is light, and the weight per square meter after being placed on the wall is about 12 kg, which is only 1/4 of the weight when the t...

​The current physical toughening method commonly used in glass cutting machines is to heat the glass to the softening point (about 650 ℃).

Glass machinery is mainly divided into two categories: glass cold treatment equipment and glass heat treatment equipment.

The glass cutting machine includes an air-floating wafer feeding table arranged in an end-to-end manner, and a double-bridge interchange cutting ta...

​The conventional single-sided glass edging machine is generally composed of the host machine (base + column + front and rear beam + grinding wheel...

​Glass edging machine is one of the earliest and largest amount of mechanical equipment produced in glass deep processing equipment. The main funct...

At present, the fundamentals of the special glass industry are very similar to the fundamentals of the steel and PVC industries that rebounded from...

​With the continuous development of science and technology, glass cutting technology and equipment have great potential and broad market prospects,...

​When the glass cutter is in use, do not plug and unplug the parallel cable connected to the computer, and do not plug or unplug any hardware devic...

The strength of the former is several times that of the latter, the tensile strength is more than 3 times that of the latter, and the impact resist...

​The common understanding of dry laminated glass is to use transparent double-sided tape and use the vacuum exhaust method to combine the two piece...