The glass drilling machine is a machine specially used for glass drilling. It is mainly divided into: base, operation table, drill bit, motor, etc., the diameter of the drilling hole is large, and the overhanging space of the machine base is large. It has low working table height and easy operation. The lower drill adopts air pressure speed regulation and stable speed. It is an ideal drilling machine for glass processing enterprises.
Precautions:
· Pay attention to safety during commissioning and use. Do not touch moving parts or live parts when the machine is started.
· Do not place tools and other objects on the conveyor rails and covers.
· In an emergency, immediately press the "Emergency Stop" button or pull down the air switch.
· Pay attention to the grinding situation at any time: the wear of the grinding wheel should be compensated in time.
· Keep sufficient cooling water volume and clean water quality of the water tank at any time to avoid burning the grinding wheel and glass, and clean up the grinding impurities in the water inlet and outlet pipelines in time to keep the water channel open.
· Before working, check whether all the travel switches work normally and the control direction is correct. If it is incorrect or the control direction is wrong, stop and check immediately, otherwise the machine will be fatally damaged.