You can use a thermal process to heat the glass straw to its softening point temperature (usually 500-700℃), at which time the glass molecular structure is relaxed and has strong plasticity. We can perform external force forming: in the softened state, apply directional pressure through the mold to bend the glass tube according to the preset arc. Finally, rapid cooling and shaping: the glass tube is quickly solidified by forced cooling (such as blowing or cooling), locking the bending shape and restoring rigidity. The specific steps are as follows:
1. Preheat the glass tube: preheat the glass tube on a low fire to reduce the stress caused by sudden heating.
2. Heat the bending part: place the part to be bent on the flame to heat. The heating length is about 2 times the diameter of the tube, and the glass tube is slowly and evenly rotated to ensure uniform heating.
3. Bend the glass tube: when the glass tube is heated to yellow-red and begins to soften, remove the flame immediately. Wait for 1 to 2 seconds, and after the temperature is uniform, accurately bend it to the required angle.
4. Cooling treatment: After bending, place the glass tube on the asbestos net to cool it slowly to avoid sudden cooling and cracking.
The whole process can be completely replaced by a curved and bent glass machine. The parameters can be set through the touch screen control system to complete the automatic processing, which saves trouble and labor. If you are interested in straw bending, please feel free to consult.

